Tactical (Folding) Bolt Carrier Extension

I tried installing these on my 3 ARs that have the Law Tactical folding stock adapter with JP SCS. As others have stated, the o-rings are a tight fit around all 3 BCGs and I have to use the small rings and lots of lubricant on all 3. The reason why I knocked 1 star off is the JP SCS got stuck inside the bolt carrier extension initially despite having lubricated the articulating surfaces. I had to take apart the folder to release the SCS from the bolt carrier. Once I got everything to work, it feels very smooth though. Kudos for Anarchy for coming out with this solution. Will take them out to the range next week to test them.

Good thing there is a company that makes an adapter for the law tactical for the use of JP Silent Buffer. The adapter is a really tight fit for the BCG, but once it's in there, everything works as intended.

I purchased the Law Tactical folding adapter and the JP Silent Spring system. The extension that came with the LT folder wouldn't work. I had to take the folder back off. This thing did the trick. I've cycled about 200 rounds through my AR pistol since purchasing this and everything is smooth and quiet. The only downside to this extension is it is a TIGHT FIT with the BCG. Very tight. I even greased it, but it does keep everything together. It's so hard to pull out of the BCG, I typically cock the hammer, take both the pins out, and there's just enough clearance to lift the upper up-and-out, leaving the extension in place and just barely clearing the hammer in the cocked position.

I’ve owned this product for 6 months now and have shot around 2000 rounds of 300blk with it installed. Works great! A must have if you want to use the JP and Law Tactical systems together.
Just oil it up good when you insert it into your BCG and/or remove one or two o-rings for a better fit.